shear connector for drawn arc stud welding
Basic Info
Model No.: M10, M13, M16, M19,M22, M24, M25
Product Description
2.Drawn arc Stud Welding with Ceramic Ferrule
3.ISO-13918
shear connector (SD) with ceramic ferrule (UF type) 1. Applicable Scope of shear connector (1) Nominal diameters: Φ10-25mm cheese head shear connectors with ceramic ferrules for arc stud welding. (2) Shear connectors are typically used in composite steel construction for holding concrete slabs to steel members to resist shear forces and increase shear loading capacity in steel buildings, bridges, columns caissons, containment liners, etc. They also act as embedment anchors on miscellaneous embedded plates, frames, angles, strip plates, attachments and connections. 2. Normative references ISO 13918, GB/T 1043, JIS B 1198 3. Dimensions and mass of shear connector (SD) Symbols and abbreviated terms d = nominal diameter d1 = diameter of the weld collar dk = head diameter of shear connector k = height of the head on shear connector h = height of the weld collar l = overall length of the shear connector (excluding aluminium ball or welding tip) l = l1+WA l1 = nominal length of the stud WA = length of fluxing A = shape A of tip B = shape B of tip 1 = optional groove at manufacturer 's discretion 2 = optional arc welding tip at manufacturer's discretion α = face angle
dimensions of shear connectors (mm) | |||||||
d | d | 10 | 13 | 16 | 19 | 22 | 25 |
min | 9.64 | 12.57 | 15.57 | 18.48 | 21.48 | 24.48 | |
max | 10 | 13 | 16 | 19 | 22 | 25 | |
dk | max | 18.35 | 22.42 | 29.42 | 32.5 | 35.5 | 40.5 |
min | 17.65 | 21.58 | 28.58 | 31.5 | 34.5 | 39.5 | |
d1(1) | 13 | 17 | 21 | 23 | 29 | 31 | |
h(1) | 2.5 | 3 | 4.5 | 6 | 6 | 7 | |
k | max | 7.45 | 8.45 | 8.45 | 10.45 | 10.45 | 12.55 |
min | 6.55 | 7.55 | 7.55 | 9.55 | 9.55 | 11.45 | |
r | min | 2 | 2 | 2 | 2 | 3 | 3 |
WA | 4 | 5 | 5 | 6 | 6 | 6 | |
l1 (2) | (3)mass of shear connectors (SD) in kilograms per 1000 pieces (specific weight = 7,85 g/cm3) | ||||||
40 | 37 | 62 | |||||
50 | 43 | 73 | 116 | ||||
60 | 49 | 83 | 131 | 188 | |||
80 | 61 | 104 | 163 | 232 | 302 | 404 | |
100 | 74 | 125 | 195 | 277 | 362 | 481 | |
120 | 86 | 146 | 226 | 321 | 422 | 558 | |
150 | 105 | 177 | 274 | 388 | 511 | 673 | |
180 | 123 | 208 | 321 | 455 | 601 | 789 | |
200 | 229 | 352 | 499 | 660 | 866 | ||
220 | 384 | 544 | 720 | 943 | |||
250 | 431 | 611 | 810 | 1050 | |||
300 | 722 | 959 | 1251 | ||||
(1) d1 and h is the guide value. For special conditions, e.g. through-deck stud welding, they will be different. (2) l1 is the design value. For special conditions, e.g. through-deck stud welding, l1 will be shorter. (3) Due to the tolerances, the values of mass are only approximate. |
dimensions of B1 type ceramic ferrules for shear connectors (UF) (mm) | |||||
diameter of shear connectors d | D | D1 | D2 | H | |
min | max | ||||
10 | 10.3 | 10.8 | 14 | 18 | 11 |
13 | 13.4 | 13.9 | 18 | 23 | 12 |
16 | 16.5 | 17 | 23.5 | 27 | 17 |
19 | 19.5 | 20 | 27 | 31.5 | 18 |
22 | 23 | 23.5 | 30 | 36.5 | 18.5 |
25 | 26 | 26.5 | 38 | 41.5 | 22 |
Key 1. B1 type ceramic ferrules are mainly used for general downward welding as well as welding M13mm and M16mm shear connectors through metal deck. 2. B2 type ceramic ferrules are only used for welding M19mm shear connectors through metal deck. 3. The types of ceramic ferrules are at manufacturer's discretion. |
Product Categories : weld studs > Shear Connector (SD)
Premium Related Products